The EPEVER Tracer AN Series Photo voltaic Cost Controller can be a highly efficient solar controller suitable for off-grid photo voltaic methods. Based upon multiphase synchronous rectification engineering, it makes certain optimized Electrical power conversion and method balance for a wide array of photovoltaic (PV) purposes.
Vital Attributes in the EPEVER Tracer AN Sequence Controller
The Tracer AN sequence utilizes EPEVER Photo voltaic Charge Controller know-how for superior solar energy harvesting. Vital features include things like:
Multiphase Synchronous Rectification (MSR) for enhanced Electricity conversion.
Advanced MPPT Algorithm with >ninety nine% efficiency.
Dual-Stage Charging for Improved battery daily life.
LCD Screen with authentic-time details monitoring.
Numerous Load Handle Modes like handbook and timer.
In depth Electronic Protections from overcharging, around-discharging, short circuits, and reverse polarity.
Move-by-Phase Manual to Starting the EPEVER Tracer AN Series Controller
one. Unboxing and Getting ready the Controller
Ensure all parts are incorporated: Tracer AN device, temperature sensor, conversation cables, and person guide.
Verify the model variety and voltage scores match your photo voltaic panel and battery specifications.
2. Mounting the Demand Controller
Decide on a well-ventilated, dry site close to the battery financial institution.
Protected the Tracer AN controller using the delivered mounting brackets.
Keep correct clearance for warmth dissipation.
3. Wiring the Photo voltaic Demand Controller
Caution: Normally stick to good security protocols and make sure the system is driven off just before connecting factors.
Stage one: Connect the battery terminals on the demand controller (constructive to positive, adverse to negative).
Move two: Link the solar panel array to your PV input terminals.
Move 3: Connect the load terminals if employing a direct load relationship.
Stage four: Double-Verify all connections for polarity and tightness.
four. Configuring the Controller Settings
Electricity on the controller by connecting the battery 1st.
Utilize the Liquid crystal display Show to navigate the configurations menu.
Configure:
Battery Form: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Management Modes: Guide, timer, light Command.
5. Checking and Information Logging
The Tracer AN Series supports real-time checking using the MT50 distant meter.
Information is usually logged through the RS485 communication port working with computer software such as Photo voltaic Station PC.
Distant monitoring is possible While using the EPEVER WiFi module.
6. Troubleshooting Common Troubles
Problem one: No Energy Output
Look at battery voltage and connections.
Verify PV panel voltage exceeds battery voltage.
Difficulty 2: About-Voltage Safety
Validate the solar array’s voltage score.
Adjust technique parameters if essential.
Challenge 3: No Battery Charging
Inspect PV wiring for continuity.
Validate MPPT settings inside the menu.
Great things about the Tracer AN Sequence with MSR Technological know-how
The multiphase synchronous rectification engineering makes sure:
Greater Performance: Reduced Electricity losses throughout conversion.
Enhanced Trustworthiness: Stable effectiveness under variable masses.
For a longer period Battery Lifestyle: Reliable and accurate charging profiles.
Conclusion
The EPEVER Photo voltaic Demand Click Here Controller with multiphase synchronous rectification engineering is an Extraordinary option for optimizing solar power generation and lengthening battery everyday living. By subsequent the above mentioned set up manual, end users can be certain optimum effectiveness and process longevity.