The EPEVER Tracer AN Collection Solar Charge Controller is a hugely effective photo voltaic controller designed for off-grid solar programs. Dependant on multiphase synchronous rectification engineering, it assures optimized Strength conversion and process steadiness for a variety of photovoltaic (PV) applications.
Key Attributes of the EPEVER Tracer AN Series Controller
The Tracer AN series utilizes EPEVER Solar Charge Controller technologies for outstanding solar Electricity harvesting. Critical capabilities involve:
Multiphase Synchronous Rectification (MSR) for enhanced Electrical power conversion.
Highly developed MPPT Algorithm with >ninety nine% performance.
Twin-Phase Charging for Improved battery daily life.
Liquid crystal display Screen with authentic-time facts checking.
Numerous Load Handle Modes like handbook and timer.
In depth Digital Protections versus overcharging, about-discharging, small circuits, and reverse polarity.
Action-by-Action Information to Starting the EPEVER Tracer AN Collection Controller
one. Unboxing and Getting ready the Controller
Make sure all parts are provided: Tracer AN unit, temperature sensor, conversation cables, and person manual.
Confirm the model number and voltage scores match your photo voltaic panel and battery requirements.
2. Mounting the Charge Controller
Select a perfectly-ventilated, dry locale near the battery financial institution.
Secure the Tracer AN controller using the presented mounting brackets.
Sustain appropriate clearance for warmth dissipation.
three. Wiring the Photo voltaic Demand Controller
Warning: Normally abide More info by good basic safety protocols and ensure the method is run off right before connecting parts.
Phase 1: Join the battery terminals to your cost controller (good to positive, destructive to adverse).
Stage 2: Link the solar panel array to your PV input terminals.
Stage three: Hook up the load terminals if using a immediate load link.
Step four: Double-Check out all connections for polarity and tightness.
4. Configuring the Controller Configurations
Electric power within the controller by connecting the battery initial.
Utilize the Liquid crystal display Show to navigate the configurations menu.
Configure:
Battery Variety: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Control Modes: Handbook, timer, gentle control.
five. Checking and Details Logging
The Tracer AN Sequence supports authentic-time checking utilizing the MT50 distant meter.
Info is often logged by means of the RS485 communication port using program for example Solar Station Laptop.
Remote monitoring is achievable Using the EPEVER WiFi module.
six. Troubleshooting Widespread Problems
Difficulty one: No Power Output
Test battery voltage and connections.
Verify PV panel voltage exceeds battery voltage.
Challenge 2: About-Voltage Safety
Validate the solar array’s voltage rating.
Modify method parameters if required.
Issue three: No Battery Charging
Inspect PV wiring for continuity.
Ensure MPPT options during the menu.
Advantages of the Tracer AN Collection with MSR Engineering
The multiphase synchronous rectification engineering guarantees:
Bigger Efficiency: Minimized Power losses through conversion.
Enhanced Dependability: Secure efficiency less than variable hundreds.
More time Battery Life: Steady and accurate charging profiles.
Conclusion
The EPEVER Solar Cost Controller with multiphase synchronous rectification technologies is undoubtedly an exceptional choice for optimizing solar energy technology and extending battery lifetime. By following the above set up guide, consumers can assure maximum effectiveness and technique longevity.